M2E Wiring and Setup Instructions

m2e wiring diagram

M2E Rev A1 Dip Switch Settings

SW 4 SW 3 SW 2 SW 1 ADDRESS
OFF OFF OFF OFF PUMP 1
OFF OFF OFF ON PUMP 2
OFF OFF ON OFF PUMP 3
OFF OFF ON ON PUMP 4
OFF ON OFF OFF PUMP 5
OFF ON OFF ON PUMP 6
OFF ON ON OFF PUMP 7
OFF ON ON ON PUMP 8
ON OFF OFF OFF PUMP 9
ON OFF OFF ON PUMP 10
ON OFF ON OFF PUMP 11
ON OFF ON ON PUMP 12
ON ON OFF OFF PUMP 13
ON ON OFF ON PUMP 14
ON ON ON OFF PUMP 15
ON ON ON ON PUMP 16

SW 5 OFF for console operation, ON for standalone. (LED blinks fast)
SW 6 OFF for penny and 10x pulser, on for 100X pulser
SW 7 OFF for penny pulser and 100x pulser, ON for 10x pulser
SW 8 OFF for Gilbarco Protocol. On for Wayne Protocol

Default setting from factory: All switches off

To reset NVRAM clearing accumulated totals:
Power off
Turn all switches on
Power up for 2 seconds
Power off
Restore switches to original settings.