Instructions on Configuring the SNBC BTP_R880NP thermal printer for the TMS MPC

PLEASE NOTE: These instructions are included for your records. This printer comes already programmed for the TMS MPC or for the TMS EZ per your order.

To Begin, Hold down FEED button and turn printer on. Press and hold FEED to access settings. To choose an option, press FEED the indicated number of times and then hold FEED to initiate.

  1. Press 3 Configure
  2. Press 3 Communication
  3. Press 3 Serial Interface
  4. Press 2 Baud Rate
  5. Press 7 2400 (printer will confirm baud rate)
  6. Press 1 Back
  7. Press 1 Back
  8. Press 5 Print Settings
  9. Press 6 CR Command
  10. Press 2 Enable (printer will confirm CR is enabled)
  11. Press 1 Back
  12. Press 2 Exit with Save
  13. Press 1 Exit

PRINTER SHOULD NOW BE PROGRAMMED FOR THE TMS MPC